- Description
-
Details
Phosphates are known to be a major water pollutant. In your swimming pool they can cause numerous water quality issues including:
• Discolored cloudy water
• Poor water quality that leads to extra chemical
• Excessive scale damage to heaters
• Lower efficiency of salt generator systems
- Application
-
Directions for Use:
Be sure your filter system is clean or backwashed before adding SeaKlear Phosphate Remover. Calculate the amount of product required using the dosage guide, located on the product label.
• Pour SeaKlear Phosphate Remover directly into the deep end of your pool, spreading it over as wide an area as possible. 32 oz. of Phosphate Remover removes 3,000 ppb of phosphate from 10,000 gallons of pool water.
• Follow up with SeaKlear Natural Clarifier, at a rate of 4 oz. per 10,000 gallons or add 1 SeaKlear Mighty Pod Cloudy Pool Cure to the skimmer for up to 15,000 gallons
• Run your filter system for 24 hours.
• Check your phosphate levels to ensure they are below 125 ppb. Reapply if necessary.
• To keep phosphate levels low use SeaKlear Mighty Pods Weekly Pool Care to control phosphates, prevent scumlines and keep pool water sparkling clear